CD60 Capacitor/CD60 starting capacitors/CD60 125v motor starting capacitor
To start and run single phase m0tors in alternating current usage,
And it suit for single phase A.C. motors with frequency of 50/60Hz.
Description:
Start capacitors above 20 microfarad (µF) are always non-polarized aluminium electrolytic capacitors with non solid electrolyte and therefore they are only applicable for the short motor starting time.
Start capacitors briefly increase motor starting torque and allow a motor to be cycled on and off rapidly.Start capacitors have ratings above 70 microfarads (µF), with four major voltage classifications: 110 V, 125 V, 220V,250 V, and 330 V.A start capacitor stays in the circuit long enough to rapidly bring the motor to 3/4 of full speed and is then taken out of the circuit, such as by a centrigugal switch that releases at that speed. The motor after that runs more efficiently with a run capacitor.
Examples of motor capacitors are: a 35 µF/mfd, at 370 V, run capacitor, or an 88–108 µF/mfd at 250 V start capacitor.
A typical motor start capacitor, as can be seen by its black can shape